|
Ranger Adaptors
Ranger Flange adaptors facilitate the connection of plain ended pipe to flanged ancilliary products, in the same range of outside diameters, and multi drilling flanges further simplify installation.
|
THE FLANGE DRILLING TYPES COVERED BY RANGER ADAPTORS INCLUDE:
BS 4504 : 1989 : PN 10 AND PN 16
SABS 1123 : 1000/3 AND 1600/3
BS 10 : 1962 : TABLE D AND E
ANSI : B16.5/16.2
ASA : 150lb
|
|
NOM
BORE
Mm/”
|
PIPE
OD
mm
|
PIPE MATERIAL SUITABILITY
|
| 50mm/2" |
59-72 |
STEEL (imperial+metric), UPVC, DI, CI, AC (imperial), ABS/DWV |
| 65mm/2.5" |
72-85 |
STEEL (imperial+metric), UPVC, DI, CI, AC (imperial), ABS/DWV |
| 80mm/3" |
88-103 |
STEEL (imperial+metric), UPVC, DI, CI, AC (imperial), ABS/DWV |
| 100mm/4" |
109-128 |
STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (imperial) |
| 125mm/5" |
138-153 |
STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (imperial) |
| 150mm/6" |
159-182 |
STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial), GRP |
| 175mm/7" |
192-210 |
STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial), GRP |
| 200mm/8" |
218-235 |
STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial), GRP |
| 250mm/10" |
250-267 |
STEEL (imperial+metric), AC (cid) |
| 250mm/10" |
272-289 |
STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial), GRP |
| 300mm/12" |
315-332 |
STEEL (imperial+metric), UPVC, DI, AC, GRP |
MAX WORKING PRESURE: 16 BAR
SETTING GAP: 19mm
TOLERANCE ON ANGULAR DEFLECTION: 3 DEGREES
EXPANSION & CONTRACTION RANGE: 0-5mm
RECOMMENDED BOLT TORQUE: 70-80 Nm |
|
